 |
| |
|
| PRODUCTS
| Product Details |
|
|
PUMA TT 1500 |
PUMA TT 1800 |
PUMA TT 2500 |
|
| PUMA TL 2000 |
PUMA TL 2500 |
|
|
| |
| PUMA TT1500 |
|
| |
| Product Concepts |
|
Highly productive turning center equipped with two opposing spindles and twin turrets
Multi processes and mass production enabled by lower and upper turrets, Y-axis, left and right hand spindles
Z-axis rapid traverse of 40 m/min
Factory automation enabled by barfeeder, part unloader, gantry loader, etc (Optional features) |
| |
| |
| PUMA TT1500MS: Axis milling-mounted model |
| Description |
PUMA TT1500MS |
| Capacity |
Maximum Distance Between Spindle Ends |
750mm |
| Maximum Turning Diameter |
Upper Turret |
Φ230mm |
| Lower Turret |
Φ230mm |
| Max. Turning Length(from each spindle) |
120mm |
| Bar Working Diameter |
Φ51mm |
| Main Spindle 1 |
Spindle Speed |
6,000 r/min |
| Cs spindle Index Angle |
360(0.001) deg |
| Cs spindle Index Angle |
600 r/min |
| Main Spindle 2 |
Spindle Speed |
6,000 r/min |
| Cs spindle Index Angle |
360(0.001) deg |
| Cs spindle Index Angle |
600 r/min |
| Carriage |
Travel Distance |
X1-axis |
165 mm |
| X2-axis |
190 mm |
| Z1-axis |
470mm |
| Z2-axis |
490mm |
| B-axis |
540mm |
| Rapid Traverse |
X1-axis |
20m/min |
| X2-axis |
20m/min |
| Z1-axis |
40m/min |
| Z2-axis |
40m/min |
| B-axis |
40m/min |
| Turret |
Number of Mounted Tools |
Upper Turret |
12 |
| Lower Turret |
12 |
| OD Tool Size |
20mm |
| Boring Bar Diameter |
Φ32mm |
|
| |
| PUMA TT 1500SY: Y-axis-mounted model |
| |
Description |
|
PUMA TT1500SY |
| Capacity |
Maximum Distance Between Spindle Ends |
|
750mm |
| Maximum Turning Diameter |
Upper Turret |
Φ230mm |
| Lower Turret |
Φ230mm |
| Max. Turning Length(from each spindle) |
|
120mm |
| Bar Working Diameter |
|
Φ51mm |
| |
|
|
|
| Main Spindle 1 |
Spindle Speed |
|
6,000 r/min |
| Cs spindle Index Angle |
|
360(0.001) deg |
| Cs spindle Index Angle |
|
600 r/min |
| |
|
|
|
| Main Spindle 2 |
Spindle Speed |
|
6,000 r/min |
| Cs spindle Index Angle |
|
360(0.001) deg |
| Cs spindle Index Angle |
|
600 r/min |
| |
|
|
|
| Carriage |
Travel Distance |
X1-axis |
165 mm |
| X2-axis |
190 mm |
| Z1-axis |
470mm |
| Z2-axis |
490mm |
| B-axis |
540mm |
| Rapid Traverse |
X1-axis |
20m/min |
| X2-axis |
20m/min |
| Z1-axis |
40m/min |
| Z2-axis |
40m/min |
| B-axis |
40m/min |
| |
|
|
|
| Turret |
Number of Mounted Tools |
Upper Turret |
12 |
| Lower Turret |
12 |
| OD Tool Size |
|
20mm |
| Boring Bar Diameter |
|
Φ32mm |
| |
| Optional Features |
- Automatic door
- Device for automatically breaking power supply
- Automatic measuring device (separate agreement for details)
- Chip conveyor and bucket
- Collet chuck
- High pressure coolant pump
- 3 colored signal
- Special chuck
- Tool monitoring system
- Tool pre-setter (hydraulic type/manual type)
- Air gun
- Automatic door with safety device
- Bar feeder interface
- Coolant blower
- Dual chucking pressure
- Hardened and ground jaws
- Minimum quantity lubrication (MQL) system
- Oil skimmer
- Parts unloader and conveyor
- Proximity switches for chuck clamp detection
- Pressure switch for chucking pressure check
|
|
|
|
|
