 |
| |
|
| PRODUCTS
| Product Details |
|
|
PUMA MX1600 |
PUMA MX2100 |
PUMA MX2600 |
|
| PUMA MX3100 |
|
|
|
| |
| PUMA MX 3100 |
|
| |
| Product Concepts |
|
Process integrated multi-tasking turning center
By integrating turning center and machining center, all machining process done in single chucking set up.
Equipped with a milling spindle and an ATC, equivalent to those for the machining center
5-axis contouring of B-axis in 0.001 degree control (Optional feature) |
| |
| |
|
| Description |
PUMA MX3100 |
| Capacity |
Max. Turning Diameter |
Φ760mm |
| Max. Turning Length |
1,540mm |
| Bar Working Diameter |
Φ102mm |
| Main Spindle |
Spindle Speed |
3,000 r/min |
| Milling Spindle |
Milling Spindle Speed |
12,000 r/min |
| Carriage |
Travel Distance |
X-axis |
630 mm |
| Z-axis |
1,585mm |
| Y-axis |
230mm |
| C1-axis |
360(0.001) deg |
| A-axis |
1,550mm |
| B-axis |
240deg |
| Rapid Traverse |
X-axis |
36m/min |
| Z-axis |
36m/min |
| Y-axis |
26m/mm |
| A-axis |
7m/mm |
| C1-axis |
400r/min |
| B-axis |
42m/min |
| Max. Cutting Feedrate |
X-axis |
500mm/rev |
| Z-axis |
500mm/rev |
| Y-axis |
500mm/rev |
| C1-axis |
4,800deg/min |
| Turret |
Number of Mounted Tools |
40 |
|
| |
| |
|
| Description |
PUMA MX3100S |
| Capacity |
Max. Turning Diameter |
Φ760mm |
| Max. Turning Length |
1,540mm |
| Bar Working Diameter |
Φ1002mm |
| Main Spindle (left and right) |
Spindle Speed |
4,000 r/min |
| Milling Spindle |
Milling Spindle Speed |
12,000 r/min |
| Carriage |
Travel Distance |
X-axis |
630 mm |
| Z-axis |
1,580mm |
| Y-axis |
230mm |
| A-axis |
1,550mm |
| C1-axis |
360(0.001) deg |
| C2-axis |
360(0.001) deg |
| B-axis |
240deg |
| Rapid Traverse |
X-axis |
36m/min |
| Z-axis |
36m/min |
| Y-axis |
26m/mm |
| A-axis |
30m/min |
| C1-axis |
400r/min |
| C2-axis |
400r/min |
| B-axis |
42m/min |
| Max. Cutting Feedrate |
X-axis |
500mm/rev |
| Z-axis |
500mm/rev |
| Y-axis |
500mm/rev |
| A-axis |
500mm/rev |
| C1-axis |
4,800deg/min |
| C2-axis |
4,800deg/min |
| Turret |
Number of Mounted Tools |
40 |
|
| |
| Optional Features |
- Air gun
- Automatic door with safety device
- Automatic measuring system (in process touch probe)
- Automatic power off
- Bar feeder interface
- Bar puller
- Chip conveyor
- Chip bucket
- Coolant blower
- Dual chucking pressure
- Hardened and ground jaws
- Linear scale (X1/X2/Y/Z1-axis)
- Minimum quantity lubrication (MQL)
- Oil skimmer
- Oil mist collector
- Pressure switch for chucking pressure check
- Parts unloader and conveyor
- Servo driven steady rest (none Lower turret)
- Signal tower (yellow, red, green)
- Special chucks
- Through the spindle coolant (Left or Right spindle)
- Tool monitoring system
- Tool pre-setter (Auto type-renishaw mode)
|
|
|
|
